While the box and unit were not damaged, the Beagle Features Black had jostled partially off the pins causing it not to boot and popping a blade cable loose as well.
Once these were secured the S4 powered on with no issues. The LCD tells you the IP address that the miner is on so you can easily navigate to the control panel and add your pool settings and password.
We highly suggest bitcoin you change it to something secure. The control panel is the same as you are used to with Bitmain miners.
Very feature rich and easy to use. The use of DHCP can make for an easier time getting the miner on your network especially if you use a nonstandard addressing system or IP address setup.
The first thing I will suggest is you to flash the unit to the newest firmware. The new firmware contains the mining 4. With the shipped firmware on batch one, you will find that many times the hash rate will not report correctly, and poolside will only mining up as less than half or less of the total hash rate.
Make sure to set the difficulty to on your pool. Right now BTCGuild works the best. Ghash and eligius work but not up to full speed with the newest firmware. We were not able to get it to work well with P2Pool.
Best Bitcoin Mining Hardware
NastyPool gave me the best results at roughly 1. The driver needs to be fixed to allow better compatibility and currently ckolivas of cgminer is working on better cgminer results but is encouraging Bitmain to fix their driver.